Big Devlog #1
EN
Contents Wishlist

Big Devlog #1

Hi everyone! The game gets a huge amount of work every single day, nonstop, so I decided to share what got done over the last month. This devlog took a lot of time to put together, but it's all so I can show you where the game is now and what's coming next.

Big Devlog #1
Best moments of the month
Duct tape
Best moments of the month
Grinder
Best moments of the month
The siphon
Best moments of the month
Safe cracking
Best moments of the month
Grenade
Best moments of the month
Vodka and food
Best moments of the month
Plunger
Best moments of the month
Welding
Best moments of the month
The siphon
Best moments of the month
Duct tape
Best moments of the month
Mini lift and work lights
Best moments of the month
Cigarettes
Best moments of the month
Wrench and bolts
Best moments of the month
Hoses
Best moments of the month
Duct tape
Part 1

Plumbing

01

Pipes. Now on a grid

One grid for all pipes. A graph. 50+ parts. New holding animations.

Every new and reworked pipe part

A fixed grid for every house

Every house now has its own fixed grid, and every position on it is calculated. That makes it far more reliable: a pipe at one end of the house will connect to a pipe at the other end, 100% of the time.

50+ new and reworked parts

Straights from 0.25 to 2 m, elbows, tees, crosses and caps in two thicknesses, a reducer between them, a wheel valve for the thick pipe, a ball valve for each size and 6 anchors that start a run from a wall or the floor. Flanged ones for some tools, bare ones for other approaches.

30+ new materials and 3 pipe classes

Cheap rusty steel (4 kinds); decent painted steel in 8 colors, each one new, used or old (24 kinds); pricey copper and brass (6 kinds). Textures are 4 times sharper than before!

Bolts you can always reach (I hope)

Before a pipe goes in, the game checks that a real body can get a wrench on its bolts: 12 distances and 24 directions around the joint, standing and crouched, right hand and left, with the handle clear of the walls and no head in its way. Only then does it pick the holes. While it thinks, the ghost thinks too. Or you can skip the wait, place the pipe right away and hope the bolts fit.

The thinking ghost with floating formulas

Plans and holograms

On jobs where you have to lay the pipework from scratch, it's better to plan first. The radial menu got reworked: new style, new sprites. Open the plan, pick a part from a ring of seven and drop holograms onto the grid. Then bring the real pipe and it slides into its hologram. The whole crew sees the same plan.

Placing holograms, then a real pipe sliding into one

Holding poses

Some of you know what a pain it is to mess with finger animation, but I still decided to make a holding pose for every part.

Holding every kind of pipe part, seen from the side
Holding every kind of pipe part, first person
02

Duct tape

My favorite thing this month. Blue tape, applied with confidence and zero skill.

Roll flying around a joint, back to the hand

No welder or other tools at hand, and a bare joint needs holding together on the cheap? Duct tape to the rescue: it wraps every kind of joint (flange + flange, bare + bare, bare + flange). Two wraps hold a bundle together for carrying. Six lock the joint for water. Anything past that adds strength against pressure.
P.S. Yes, your hand just sort of does magic while the tape wraps itself (sorry, but doing inverse kinematics here would have driven me nuts).

Juice

I tried to make it feel alive and fun, something you enjoy doing and don't want to stop. You can wrap up to 100 times if you like, though is there any point? The game will keep hinting that tape won't replace welding: over 100 lines you'll see in the demo.

Wrapping past ten: MAX!, ENOUGH!, joke lines

Peeling it off

Found a better way to hold the joint? Get ready to unwind the tape by hand, or with a grinder. A few effects of my own and just as much fun.

Wraps popping off as crumpled balls

Patches

A pinhole leak in the pipe? Slap a tape patch on it, fast! Inverse kinematics in action. The realistic splash from the slap isn't there yet, it's in the works.

Stretching arm slapping a patch on a leak
03

Wrench and bolts

You'll tighten hundreds of bolts, so the hundredth has to feel as good as the first.

Wrench on a top bolt
Wrench on a bottom bolt, from below
Wrench on a low side bolt
Another top bolt, from above

Your plumber walks to a spot where the wrench will actually fit and turning it feels comfortable.

The camera drops to eye level, the background blurs and the bolt is in focus. Drag to turn, up to 60° per grip, then regrip on the next face. The handle stops against the pipe, the wall or your own body.

A lot of work went into finding the best spot: the wrench doesn't sink deep into the pipe, the hand doesn't end up inside it, the camera stays level and you can see the bolt. Very rarely you can still land in an awkward pose where turning is a pain (two degrees per drag). I need more info on when that happens, so I'll be watching for it in playtests.

Bolts and cans

Bolts can now be stored in cans: soup holds 8, coffee 16, cookies 24. Point at a joint and the can nods, a bolt shoots out in a spiral, weaves around the pipes, finds its hole and threads itself in. Mixed bolts in one can? Shake it to switch to the next bolt: they fly up with a bit of flair and drop back in. The can always shows exactly as many bolts as you have left.

Shaking the can: bolts fountain up and drop back in
A bolt spirals out of the can toward the joint

New cans and reworked bolts

The bolt is new: a wrench head with a chamfer, a washer and real thread. Eight finishes from Rusty to Gold. The cans have a kitchen theme (I know plenty of people out there keep their bolts exactly like this).

The three cans and all eight bolt finishes
04

Grinder

The grinder you got from grandpa. New cut, new model.

Cutting a riser at the floor: the pipe drops
Cutting a piece out of a run, the ends glow
A long cut on a red pipe, the piece falls out
Cutting right through duct tape: bits fly off

You can cut any straight pipe, whatever its size or type. The tougher the pipe class, the longer the cut takes. The logic that finds where to stand when you start got rethought and polished. You can cut a pipe every 25 centimeters and cut through pipes that are already in place or welded. Horizontal pipes cut, and so do vertical ones. And what if you cut a pipe and the whole line comes down? A bundle with up to 2 m of pipe in total goes up on your shoulder, but a longer chain will take some magic: cut it into pieces on the floor or undo the bolts, if there are any.

The visuals

I tried to squeeze everything I could out of the visuals too. The pipe heats up and slowly cools down, sparks fly and bounce off the floor, there's light, a red-hot cut and glowing metal drops, all for maximum immersion (if maybe a little over the top)! In a real basement it looks way juicier than in the spotless studio!

Reworked model

The old model is gone for good. Now the grinder looks like grandpa really did work with it for decades. New texture, new geometry.

Grandpa's grinder standing on its handle
Grandpa's grinder, disc facing the camera
Grandpa's grinder, disc on the floor, gearbox up
05

Welding

Slow, heavy, eye-searing.

Welding with the mask on
Welding with the mask up (afterimages)
The new reworked kit on the plumber
A friend is welding, our mask is up (afterimages)

Welding is simple, but it's dangerous for your eyes and your teammates' eyes. The whole mechanic is polished: the same best-spot search, a procedural seam and effects. If you're the welder, better not forget your mask. If you're not, don't look at the weld.

The kit

Put it on: tanks with backpack straps on your back, the regulator in your left hand, the torch in your right, the helmet on your head. Everyone sees the whole kit on you.

Helmet, regulator box and both tanks
Welding gas and propane, hoses on both sides
Regulator gauges and the torch hose

The weld

Drop the mask and the world goes dark: through the glass you only see bright things, the arc, the hot seam, the lamps. Blue dots show what still isn't welded. Strike the arc and smoothly guide the torch around the ring. The seam comes out lumpy, with heat-tint colors, and blue-white sparks fly everywhere.

Tack, then seam

A tack weld holds the parts together from about 5% of the ring, a full seam locks the joint. Changed your mind? Grind through the seam.

06

The siphon

SIPHON2000: a backpack water vacuum. Sucks so hard, any hooker would step aside for a nervous smoke.

Sucking up a puddle, first person
Draining a flooded room, then the tank steams on the floor
Water rises in a stream into the nozzle
From the side: the plumber drinks the flood, steam from the pipe

SIPHON2000 is a backpack vacuum with a steam generator. It sucks up water and turns it into steam, but that takes time. The tank has a limit, and you can't suck up more than that until the water has turned into steam. Keep going and overdo it, and it overheats and goes boom, and you and your friends end up out cold on the floor.

For the visuals, there's a hose that pumps the water, steam from the pipe and a suction effect with particles and warped air. It also got its own info gauge in the UI.

Model

I reworked the model a bit and gave it a texture.

SIPHON2000 from the front, exhaust pipe on the left
SIPHON2000 from the side, the red bell nozzle
SIPHON2000 from the back: wires, radiator, the hose
07

Hoses

Flexible hoses got optimized and stabilized.

A hose is part of a bundle, just like any other pipe
Easy to hook up
Unpacking and packing
Boxes for shipping and carrying

Messed up the route somewhere while laying pipe? Or just don't feel like wrestling with heavy pipes? Grab a flexible hose. Connect the two ends, weld or bolt them (depending on which hose you bought) and you're done. It does handle pressure worse, though, so it won't be the answer to every job.

For now there are two types of hose, thick and thin. They all have a fixed length but can stretch a little. Later on I'll look into adding hoses of different lengths.

On the technical side, the hoses got a huge amount of work: they're much more stable, feel nicer to handle and run better. That goes for all the other hoses too, in the welding kit, in the SIPHON2000 and elsewhere.

Models

The hose ends got reworked models, and I made some simple box models. There's also a new corrugated material for the hoses.

FLEX HOSE boxes: thick and thin, flanged and weld-on
Thick and thin hoses in six colours, corrugated
The new hose ends: flanged and weld-on, thick and thin
08

Mini lift and work lights

Can't reach? Screw ladders, bring this thing on wheels. So dark even a flashlight doesn't help? Bring work lights.

Roll it up to the pipe, ride up and cut
Pushing the lift with a friend inside
Folded up and carried in your hands
Setting up a work light

Ladders are way too boring, so I decided the problem of not reaching the pipes needed a fix with a twist. The mini lift gets you up there. Just roll it to the right spot, climb in and go up. If you still need to shift over to the joint to get a good pose for the grinder, the welder or the wrench, you can do that yourself: the prompt at the joint helps and rolls the cart over automatically with you in it.

You can push the cart around on its wheels yourself, even with a friend inside, or fold it up and carry it in your hands. A really handy thing that'll help you more than once. And work lights, because why not. It gets dark sometimes, and your hands are too busy for a flashlight. Set up a work light and enjoy having your eyes burned out by the glare.

P.S. Yes, I know the player inside gets shaken around a bit when someone pushes the cart. It's actually a tricky problem, and I'm still working on it in the time left over from the main tasks.

Model

Made in a homemade style. Later on I'll think about adding other ones if there's a need for it.

The homemade scissor lift
Folded: the rails and the control box lie on the deck
The control box: up, down and stop
09

Valves

Valves: no matter where they are, if you can reach one, you can turn it.

Wheel in front of you
Wheel facing the floor, overhead
Wheel facing the sky
Wheel down by your feet

If you can reach the wheel, you can turn it, no matter where it is: in front of you, facing the floor, facing the sky or down by your feet. Each position has its own hand pose and its own tweaks, so the wheel always stays in the middle of the screen and turns without twisting your arms. Everyone watching from the side sees the progress.

Models

I made a ball valve: just a lever instead of a wheel, for both the large and the small pipes.

P.S. While writing this devlog I realized I forgot to make a texture for the wheel valve. I'll do it! :)

Ball valve for the thick pipe
Ball valve for the thin pipe
Part 2

Stealing

10

Safe cracking

Completely rethought. Intuitive and satisfying interaction.

Flushington safe: cutting four latches, then the loot
Fireproof safe: six latches and a jackpot
Small safe from the side: cut, open, cash flies out
The small safe can just be carried out

3 classes of safes: a small one with two latches, a regular one with four and a big one with six. The grinder goes into the gap and cuts through each latch, and you see the progress right away. On the last latch: a dull thud, a creak, dust, bills fanning out, and a gleam if there's gold inside. The door swings out a little, and from there you pull it open like any door. Random loot on the shelves, depending on the class of the house on the job.

The small safe doesn't have to be opened: you can just carry it out of the owner's house. Unopened, you can sell it to the fence at the junkyard. The fence doesn't know what's inside and names a price on gut feeling. Who knows whether it pays to sell it unopened and get guaranteed money, or whether there's a real jackpot inside (or nothing)?

Five new safes

All five safes in a row
Small safe

Small safe

Flushington safe

Flushington safe

Fireproof safe

Fireproof safe

Grandpa's old safe

Grandpa's old safe

ProSafe 3000

ProSafe 3000

Part 3

Everything else

11

Vodka and food

Everything you can put in your mouth

Vodka

Sip by sip, and you're already feeling good. Sometimes a burp, sometimes a little fart. With every sip the screen swims, doubles and smears a bit more, your aim drifts and you veer sideways while walking, and when you're really drunk you stumble and fall. Your friends see your drunk face: the eyebrows, the happy mug, the half-closed eyelids. Overdo it and you pass out and snore loud enough for the whole crew.

Drunk screen: it swims, doubles and smears
A friend drinking, seen from the side

Food

Three options to suit your taste, to fill you up and win back the health you lost to a wrench flying into your head. Chicken, a hot dog or a sausage. New bitten models for the hot dog and the chicken. Every bite comes with a nice little visual kick, and from the side you can see the mouth chewing, then the left hand wiping it. A little while after eating, you may let out a few farts.

Eating from the fridge

Models

I also made a model of an old Soviet fridge that will stand in grandpa's office. Legend has it he once fixed the pipes at a vodka distillery, and ever since he's had a lifetime subscription: one bottle of vodka a day, delivered to the fridge, free of charge.

Grandpa's Soviet fridge: closed and open
Chicken, every stage of being bitten
Hot dog, every stage of being bitten, and a sausage
Syringes from different angles
12

Cigarettes

For a smoke break

Smoking in first person
Smoking, seen from the side

A plumber always needs work. And work always needs a smoke break. And a smoke break needs cigarettes. About 9 key poses for the animations, nice visual effects for the smoke, the smouldering cigarette and the feel of a drag.

Models

KRANTY: a closed pack and an open full one
KAPUT: a closed pack and an open full one
SMOG: a closed pack and an open full one
FLICK lighters: closed, and open with the flame
13

Plunger

Rethought and reworked for throwing

A plunger to a friend's head
Pulling it off, seen from the side
Plunger on your head, first person

The plunger throw has been reworked, especially for clients: it all runs on real, carefully thought-out prediction. There's a new first-person suction effect, and you can now pull the plunger off your head yourself. I'll keep working on the ragdolls, so they fall more realistically.

14

Grenade

Two and a half seconds to regret it.

A grenade from the table: the blast throws everything around
A friend flying off the table

Bugs and animations fixed, and the explosion logic reworked, along with how it hits the physics objects and bodies around it. The blast effects got a proper pass too, both visual and sound.

Part 4

Behind the scenes

15

Sound

I'm not a sound designer, and this is the slowest part of the work for me. Every sound gets picked, layered and tweaked until it fits, and sometimes it just doesn't. Either way, I'll keep trying to bring every moment as close to perfect as I can.

16

Hints and languages

Switch items and a small card slides in at the bottom right: icon, name, what you can do with it. After three seconds it slides away. Hints next to objects tell you why something won't work, like "Too high - need a step". Hold one key to see every control. Under the hood there's now a solid, convenient architecture for localizing the game into every promised language.

17

Loot, poses, risk

Every loot item now has its own holding pose animation. Added juice and reworked the effects when you steal something. Fixed bugs and improved the risk system. Built tracking systems that calculate the risk on a job.

18

What's next

November goes to meticulous, hard work on hydraulics, water graphs, pressure and everything to do with water and pipes, plus a few other important phases.

See you in the next one.

The best way to support the game is to wishlist it, follow it, tell your friends about it and share it! To keep up with all the news and be first in line for the playtest, join the Discord.

P.S. Work on getting the playtest ready is in full swing.